L2 Cache Example#

The L2 cache example demonstrates how to use the software defined L2 cache.

Deploying the firmware with Linux or macOS#

Run the following commands in the xcore_iot root folder to build the firmware:

cmake -B build -DCMAKE_TOOLCHAIN_FILE=xmos_cmake_toolchain/xs3a.cmake
cd build
make example_freertos_l2_cache

Before running the firmware, the swmem must be flashed.

make flash_example_freertos_l2_cache_swmem

Running with hardware.

make run_example_freertos_l2_cache

Run the following commands in the xcore_iot root folder to build the firmware:

cmake -G "NMake Makefiles" -B build -DCMAKE_TOOLCHAIN_FILE=xmos_cmake_toolchain/xs3a.cmake
cd build
nmake example_freertos_l2_cache

Before running the firmware, the swmem must be flashed.

nmake flash_example_freertos_l2_cache_swmem

Running with hardware.

nmake run_example_freertos_l2_cache